For the complete experience, please enable JavaScript in your browser.
info@soakwells.com
SoakwellsPolypropylene SoakwellsConcrete SoakwellsSoakwell Installers PerthWhat is a soakwell?Photos of SoakwellsSoakwells Information & MythsSoakwells PerthQuotesTestimonialsGalleryContact BlogGrill Stormwater System vs Direct ConnectionSoakwells & Stormwater For new HomesWhat Is A Soakwell?Perth Soakwells Wins 2015 WOMO AwardSoakwells Perth | Soakwell Installation in StreetAbout UsMission StatementSoakwells Shop
0411959521
DOWNLOAD BELMONT

CITY OF BELMONT

STORMWATER DRAINAGE AND SOAKWELL REQUIREMENTS FOR THE FOLLOWING SUBURBS


Suburbs

Ascot
Belmont
Cloverdale
Kewdale
Perth Airport
Redcliffe
Rivervale

1. Included with the documents submitted to the Citys Building Department for a Building Licence shall be a site plan showing the following drainage details :-
1.1 Existing ground levels or contours. (AHD) 1.2 Proposed levels of paved or concrete areas. (AHD) 1.3 Details of roof and pavement drainage disposal. 1.4 Size (depth and diameter) and location of all soakwells. 1.5
Minimum size soakwell allowable for roof water disposal is :-
900mm diameter x 600mm deep
2. The following conditions shall also apply :-
2.1 All soakwells installed in paved or concreted areas shall be provided with trafficable lids accessible for maintenance purposes.
2.2 Soakwells to be no closer than 1.0m to a footing or boundary
2.3 All soakwells used shall be of an approved manufacture and standard. PVC soakwells are not acceptable in areas subject to vehicular traffic.
2.4 All soakwells installed within flexible pavement areas (bitumen or brick paving) shall be provided with an approved base to prevent any subsidence of the well liners.
2.5 Soakwells shall be used only where soil and groundwater conditions are suitable and require a minimum of 1200mm depth from the proposed finished level to the maximum groundwater level.

STORMWATER CITY OF BELMONT